Installation of drawer glides: Identify left and right metal drawer glides. Insert the metal glide into the boot at the back of the cabinet at the sliding receiver. Screw the front of the glide to be flush with the middle of the face frame. The glide connects to the inner piece of wood. Drawer height adjusts with orange turn screws on the underside of each drawer. Use this wheel to adjust the elevation to make gaps equal on completion. Gently lift the drawer and turn the screw to adjust the height. Slide the glide out if the cabinet. Place the drawer onto the glide. You will see a receiver hole at the back of the drawer that hooks into the glide. Hold the glide on one side and slide the drawer towards the back of the cabinet without the glide moving. The drawer catch will click when secure. Repeat glide/catch connection for the second side. (A few cabinets do not have the soft-close glide: spice rack, trash pull-out).
For pull-out trash can and spice rack, it will require using two equal-height guides to install the glides. Use a 2x4 or other thick material to provide a level guide to attach the glide backside to the cabinet back interior and the front stop frame.
Once all the cabinets have been assembled and installed, you can add any finishing touches such as molding or trim. This step is optional but can enhance the overall look of your cabinets. Finally, step back and admire your handiwork! Your new cabinets are now ready to be used and enjoyed for years to come.
Some additional tips to keep in mind:
As you assemble the cabinets, periodically check for squareness and adjust as needed to ensure that the final result is straight and level.
Take your time with the drawer assembly, as this can be one of the most time-consuming parts of the process.
When installing the cabinets, use shims as needed to ensure that they are level and secure.
Be sure to follow all safety precautions when working with power tools and sharp objects.
If you have any questions or concerns during the assembly process, don't hesitate to consult the manufacturer's instructions or contact customer support for assistance.
Assembling your RTA cabinets is not difficult. A single cabinet can be assembled in 30-60 minutes if experienced up to two hours for a novice. The standard kitchen will take a full 8-12 hours to assemble.
It is best if only one cabinet is assembled at a time. To become familiar with the hardware you can start with a wall cabinet first. The drawer hardware and assembly will take the most time.
The painted finish is of good quality and durable. Steps should be taken to ensure they are not damaged or scratched during assembly.
Work in enough space that you are not banging into cabinets
Have a clean working space. You should have a flat space to work without any screws or items that would scratch the cabinet finish.
Keep close tabs on all hardware. Lost screws or other hardware will make it difficult to accomplish the assembly and may cause scratches.
Lay a moving blanket or other soft material if placing finish on ground to help prevent scratching.